Sort by [Relevance | Date]

Publications
  • "Auto-calibration of robot workcells via remote laser scanning", J. Park, G. Min, D.-Y. Kim*, Robotics and Computer-Integrated Manufacturing, 78, 1-14, 2022 download
  • "Assembly part positioning on transformable pin array fixture by active pin maximization and joining point alignment," J.-W. Park, J. Park, H. Kim, N. Kim, D.-Y. Kim*, IEEE Transactions on Automation Science and Engineering, 19(2), 1047-1057, 2022 download
  • "In-process noise inspection system for product fault detection in a loud shop-floor environment," W. Baek and D.-Y. Kim*, IEEE Transactions on Instrumentation & Measurement, DOI: 10.1109/TIM.2021.3061269, 2021 download
  • "Estimating System State through Similarity Analysis of Signal Patterns," K. Namgung, H. Yoon, S. Baek, D.-Y. Kim*, Sensors, 20(23), 6839, 2020 download
  • "An in-Process Inspection System to Detect Noise Originating from within the Interior Trim Panels of Car Doors," W. Baek, D.-Y. Kim*, Sensors, 20(3), 630, 2020 download
  • "A Modular Factory Testbed for the Rapid Reconfiguration of Manufacturing Systems,” D.-Y. Kim*, J.-W. Park, S. Baek, K-B. Park, H.-R. Kim, J.-I. Park, H.-S. Kim, B.-B. Kim, H.-Y. Oh, K. Namgung, and W. Baek, Journal of Intelligent Manufacturing, 31, 661-680, 2020 download
  • "An Extended Agent Communication Framework for Rapid Reconfiguration of Distributed Manufacturing Systems," J. Park, M. Shin, D.-Y. Kim*, IEEE Transactions on Industrial Informatics, 15(7), 3845-3855, 2019 download
  • "Fault Prediction via Symptom Pattern Extraction Using the Discretized State Vectors of Multi-Sensor Signals", S. Baek, D.-Y. Kim*, IEEE Transactions on Industrial Informatics, 15(2), 922-931, 2019 download
  • "Abrupt Variance and Discernibility Analyses of Multi-sensor Signals for Fault Pattern Extraction", S. Baek, D.-Y. Kim*, Computers & Industrial Engineering, 128, 999-1007, 2019 download
  • "Plant Location Selection for Food Production by Considering the Regional and Seasonal Supply Vulnerability of Raw Materials," J. Park, H. Oh, D.-Y. Kim*, Y.Cho, Mathematical Problems in Engineering, https://doi.org/10.1155/2018/7494398, 2018 download
  • "Early Degradation Detection of the Insulation Resistance of Multi-Layer Ceramic Capacitors by the Pattern Analysis of Capacitance and Dissipation Signals," S. Baek, D. Kwon* and D.-Y. Kim*, Nanoscience and Nanotechnology Letters, 10(9), 1227-1231, 2018 download
  • "Characterization of System Status Signals for Multivariate Time Series Discretization Based on Frequency and Amplitude Variation," W. Baek, S. Baek and D.-Y. Kim*, Sensors, 18(1), 154, doi: 10.3390/s18010154, 2018 download
  • "Defect state and severity analysis using discretized state vectors", S. Baek, W. Baek, D. Kwon, D.-Y. Kim*, Journal of Mechanical Science and Technology, 32(6), 2441-2451, 2018 download
  • "A Dynamic Information-Based Parking Guidance for Megacities considering Both Public and Private Parking", J.-H. Shin, N. Kim, H. Jun, D.-Y. Kim*, Journal of Advanced Transportation, https://doi.org/10.1155/2017/9452506, 2017 download
  • "Standard Time Estimation of Manual Tasks via Similarity Measure of Unequal Scale Time Series", J. Park, D.-Y. Kim*, IEEE Transactions on Human-Machine Systems, 48/3, 241-251, 2017 download
  • "Empirical sensitivity analysis of discretization parameters for fault pattern extraction from multivariate time series data", S. Baek, D.-Y. Kim*, IEEE Transactions on Cybernetics, 47/5, 1198-1209, 2017 download
  • "The Effects of Laser Welding Direction on Joint Quality for Non-Uniform Part-to-Part Gaps", R. Oh, D.-Y. Kim*, D. Ceglarek, Metals, 6/8, 1-13, 2016 download
  • "Rapid Deployment of Remote Laser Welding Processes in Automotive Assembly Systems", D. Ceglarek*, M. Colledani, J. Vancza, D.-Y. Kim, C. Marine, M. Kogel-Hollacher, A. Mistry, L. Bolognese, CIRP Annals Manufacturing Technology, 64/1, 389–394, 2015 download
  • "Real-time parameter adjustment and fault detection of remote laser welding by using ANN", K.A. Kurniadi, K. Ryu, D.-Y. Kim, International Journal of Precision Engineering and Manufacturing, 15/6, 979-987, 2014 download
  • "A Hybrid Model of Component Sharing and Platform Modularity for Optimal Product Family Design" T. Agrawal, A. Sao, K. Fernandes, M K Tiwari*, D.-Y. Kim, International Journal of Production Research, 51/2, 614-625, 2013 download
  • “Correlation analysis of the variation of weld seam and tensile strength in laser welding of galvanized steel”, A. Sinha, D.-Y. Kim*, D. Ceglarek, Optics and Lasers in Engineering, 51/10, 1143-1152, 2013 download
  • “A Radically Assembled Design-Engineering Education Program with a Selection and Combination of Multiple Disciplines ”, K. Kim, N. Kim*, S. Jung, D.-Y. Kim, Y. Kwak, G. Kyung, International Journal of Engineering Education, 28/4, 904-919, 2012 download
  • “A Novel Modeling Methodology for Collaborative Enterprise Processes”, K. Ryu*, S.Lee, D.-Y. Kim, Y. Son, International Journal of Innovative Computing, Information and Control, 8/7(B), 5369-5380, 2012 download
  • “Supplier Selection Problem Revisited from the Perspective of Product Configuration”, D.-Y. Kim, S. Wagner*, International Journal of Production Research, 50/11, 2864-2876, 2012 download
  • “Compatible Component Selection under Uncertainty via Extended Constraint Satisfaction Approach”, D.-Y. Kim*, P. Xirouchakis, Y. Son, International Journal of Industrial Engineering, 19/12, 464-474, 2012 download
  • "CO2DE: a Decision Support System for Collaborative Design,” D.-Y. Kim*, P. Xirouchakis, Journal of Engineering Design, 21/1, 31-48, 2010 download
  • “Compatibility Measurement in Collaborative Conceptual Design,” D.-Y. Kim, A. Bufardi, P. Xirouchakis*, CIRP Annals Manufacturing Technology, 55/1, 151-154, 2006 download
  • "P2P (Port to Port) Digital Logistics Platform Design", H. Lim, J. Park, D.-Y. Kim*. IFIP International Conference on Advances in Production Management Systems. Gyeongju, Korea. September 25-29, 2022
  • "Software Architecture for an Active Device Driver in Reconfigurable Manufacturing Systems", J. Shin, D.-Y. Kim*, IFIP International Conference on Advances in Production Management Systems. Nantes, France. September 5-9, 2021 download
  • "In-Process Noise Detection System for Product Inspection by Using Acoustic Data". W.Baek,D.-Y.Kim*, IFIP International Conference on Advances in Production Management Systems. Austin, Texas, United States. September 1-5, 2019 download
  • "Accelerating Technological Advancement and Adoption of Industry 4.0 Technologies: Smart-Factory Labs, Digital Capability Centers and Lighthouses Networks",D.Gorecky,D.Romero,D.-Y.Kim, presented at International Congress and Conferences on Computational Design and Engineering,Penang,Malaysia,Jul.8, 2019 download
  • "Automated Calibration of Robot Paths by Identifying Dimensional Variations and Adaptive Adjustmen”,S.M. Bucyeye, D.-Y. Kim*, International Congress and Conferences on Computational Design and Engineering, Penang, Malaysia, Jul. 8, 2019 download
  • "An in-process BSR-noise detection system for car door trims". W. Baek, D.-Y. Kim*, IFIP International Conference on Advances in Production Management Systems. Seoul, Korea. August 26-30, 2018
  • "AR/VR-based live manual for user-centric smart factory services," M. Kim, K. Park, S. Choi, J. Lee, D.-Y. Kim*, APMS2018, Seoul, 2018
  • "Defect state and pattern analysis using the discretized state vector", S. Baek, D.-Y. Kim*, Asia Pacific Conference of the Prognostics and Health Management Society, 2017
  • “An Integrated Collaboration Model for the Business Process Innovation for Small and Medium Sized Manufacturing Firms,” K. Ryu, D.-Y. Kim, M.K Tiwari, M. Shin, Proceedings of International conference on Advances in Supply Chain and Manufacturing Management, Kharagpur, India, December 16-18, 2011
  • “An Architecture for Collaborative Conceptual Design Support Systems,” D.-Y. Kim, A. Bufardi, P. Xirouchakis, 4th International CIRP conference on Digital Enterprise Technology, Bath, UK, September 18-21, 2007
  • “Characteristics of the Concept Selection Problem in Conceptual Design,” A. Bufardi, D.-Y. Kim, P. Xirouchakis, Proceedings of Tools and Method of Competitive Engineering 2006 Conference, Ljubljana, Slovenia, April 18-22, 2006
  • “Compatibility Evaluation in Collaborative Conceptual Design,” D.-Y. Kim, A. Bufardi, P. Xirouchakis, presented at PAAS workshop, Groningen, The Netherlands, May 10-12, 2005
  • “Preference-Based Combinatorial Design Problem Solving in a Collaborative Environment,” D.-Y. Kim, A. Bufardi, P. Xirouchakis, Proceedings of Tools and Method of Competitive Engineering 2004 Conference, Lausanne, Switzerland, April 13-17, 2004
  • "Virtual Manufacturing for an Automotive Company - Construction and Operation of a Virtual Body Shop and Paint Shop," D.-Y. Kim, S. Noh, S. Hong, H. Hahn, presented at IEEE Systems, Man, Cybernetics Conference 2001, Tucson, Arizona, USA, Oct. 7, 2001
  • "Linker: Active Driver Wrapper to Enhance the Reconfigurability and Autonomy of Factory Devices", J. Shin, G. Min, H. Yoon, M. Go, D.-Y. Kim*, Korean Journal of Computational Design and Engineering, 26(4), 299-312 , 2021. ("Linker: 공장 신속 재구성과 자율 운용을 위한 액티브 드라이버 Wrapper", 신정하, 민경환, 윤현식, 고민섭, 김덕영*, 한국CDE학회 논문집, 제26권, 4호, 1-14, 2021) download
  • "Defect Detection in Laser Welding Using Multidimensional Discretization and Event-Codification", S. Baek, R.Oh, D.-Y. Kim*, Journal of the Korean Society for Precision Engineering, 32/11, 989-995, 2015. ("Multidimensional Discretization과 Event-Codification 기법을 이용한 레이저 용접 불량 검출", 백수정, 오록규, 김덕영, 한국 정밀공학회지 제 32권, 11호, 989-995, 2015)
  • "An Event-driven Failure Analysis System for Real-Time Prognosis", Y. Lee, D.-Y. Kim, M. Hwang, Y. Cheong, Transactions of the Society of CAD/CAM Engineers, 18/4, 250-257, 2013. ("실시간 고장 에방을 위한 이벤트 기반 결함원인분석 시스템", 이양지, 김덕영, 황민순, 정영수, 한국 CAD/CAM 학회 논문집, 제18권, 4호, 250-257, 2013)
  • "A study on data pre-filtering methods for fault diagnosis", Y. Lee,D.-Y. Kim*, M. Hwang, Y. Cheong, Transactions of the Society of CAD/CAM Engineers, 17, 97-110, 2012. ("시스템 결함원인분석을 위한 데이터 로그 전처리 기법 연구", 이양지, 김덕영, 황민순, 정영수, 한국 CAD/CAM 학회 논문집, 제17권, 97-110, 2012)
  • “An event-driven intelligent failure analysis for marine diesel engines”, Y. Lee, D.-Y. Kim*, M. Hwang, Y. Cheong, Journal of the Korea Industrial Information System Society, 17, 71-85, 2012. (“이벤트 기반 지능형 선박엔진 결함분석”, 이양지, 김덕영, 황민순, 정영수, 한국산업정보학회 논문집, 제17권, 71-85, 2012)
  • "Virtual Manufacturing for an Automotive Company(III)-Construction and Operation of a Virtual Paint Shop," S. Noh, D.-Y. Kim, Y. Park, IE Interfaces, 15/4, 356-363, 2002
  • "Virtual Manufacturing for an Automotive Company(II)-Construction and Operation of a Virtual Body Shop," S. Noh, S. Hong, D.-Y. Kim, C. Sohn, H. Hahn, IE Interfaces, 14/2, 127-133, 2001
  • "Optimal Design of Manufacturing Workcell with Task Execution Filter for Cycle Time Estimation", E. Choi, H. Yoon, Y. Oh, T. Song, D.-Y. Kim*, 2024 Winter Conferences of Society for Computational Design and Engineering, 2024. ("제조 워크셀 최적 설계에 필요한 Cycle Time 예측을 위한 Task Execution Filter", 최은준, 윤현민, 오연석, 송태웅, 김덕영*, 한국CDE학회 2024 동계학술대회)
  • "Workcell Simulation using Linker (Active Device Driver) for Flexible Workcell Configuration and Control", Y. Oh, H. Yoon, E. Choi, T. Song, D.-Y. Kim*, 2024 Winter Conferences of Society for Computational Design and Engineering, 2024. ("유연한 워크셀 구성 및 제어를 위한 링커(Active Device Driver)기반 워크셀 시뮬레이션", 오연석, 윤현민, 최은준, 송태웅, 김덕영*, 한국CDE학회 2024 동계학술대회)
  • "Factory Information Studio Design for Manufacturing Workcell Data Standardization", T. Song, H. Yoon, E. Choi, M. Go, D.-Y. Kim*, 2024 Winter Conferences of Society for Computational Design and Engineering, 2024. ("제조 워크셀 데이터 표준관리를 위한 Factory Information Studio 설계", 송태웅, 윤현민, 최은준, 고민섭, 김덕영*, 한국CDE학회 2024 동계학술대회)
  • "Adaptive Fault Detection for Equipment Condition Changes based on Deep CCA", T. Lim, D.-Y. Kim*, 2024 Winter Conferences of Society for Computational Design and Engineering, 2024. ("Deep CCA 기반의 설비 상태 변화 적응형 고장탐지", 임태규, 김덕영*, 한국CDE학회 2024 동계학술대회)
  • "Probabilistic boundary model of multiple hyperspheres for fault detection in electromechanical systems under different operating conditions", Y. Song, D.-Y. Kim*, 2024 Winter Conferences of Society for Computational Design and Engineering, 2024. ("다양한 작동 조건에서 전기 기계 시스템의 이상 탐지를 위한 다중 하이퍼스피어의 확률 경계 모델", 송영원, 김덕영*, 한국CDE학회 2024 동계학술대회)
  • "Classification of Digital Twin Simulation Events for the Data Synchronization between Physical and Digital Traffic Systems", M. Go, H. Lim, D.-Y. Kim*, Korean Institute of Industrial Engineers, 2023. ("물리 및 디지털 교통 시스템 간 정보 동기화를 위한 디지털 트윈 시뮬레이션 이벤트 분류", 고민섭, 임해리, 김덕영*, 2023 대한산업공학회 추계학술대회 논문집)
  • "Analyzing the impact of data similarity in transfer learning", G. Lee, T. Lim, D.-Y. Kim*, Korean Institute of Industrial Engineers, 2023. ("전이학습에서의 데이터 유사도 영향 분석", 이기홍,임태규, 김덕영*, 2023 대한산업공학회 추계학술대회 논문집)
  • "Manufacturing Execution Language for Manufacturing Workcell Design and Control", H. Yoon, E. Choi, Y. Oh, T. Song, D.-Y. Kim*, The Korean Society of Mechanical Engineers, 2023. ("제조 실행 언어를 이용한 제조 워크셀 설계 및 제어 프레임워크", 윤현민, 최은준, 오연석, 송태웅, 김덕영*, 2023, 대한기계학회 2023 학술대회)
  • "Conceptual Definition of the Language Syntax and Structure of MEL-Code for Manufacturing System Execution", E. Choi, H. Yoon, Y. Oh, D.-Y. Kim*, 2023 Summer Conferences of Society for Computational Design and Engineering, 2023. ("제조 시스템 실행을 위한 MEL-Code 언어 구문 및 구조의 개념적 정의", 최은준, 윤현민, 오연석, 김덕영*, 한국CDE학회 2023 하계학술대회)
  • "MEL-Diagram for Task-Flow Focused Representation of Machine Control Logic", H. Yoon, E. Choi, Y. Oh, D.-Y. Kim*, 2023 Summer Conferences of Society for Computational Design and Engineering, 2023. ("Task와 Flow 중심 제조 Workcell 제어 로직의 표현을 위한 MEL-Diagram", 윤현민, 최은준, 오연석, 김덕영*, 한국CDE학회 2023 하계학술대회)
  • "MEL-DCS (Dynamic Coordinate System) for Enhancing Flexibility and Efficiency in Workcell Configuration and Grouped Device Control", Y. Oh, H. Yoon, E. Choi, M. Go, D.-Y. Kim*, 2023 Summer Conferences of Society for Computational Design and Engineering, 2023. ("Workcell 구성 및 그룹화된 디바이스 제어의 유연성과 효율성 향상을 위한 MEL-DCS (동적 좌표 시스템)", 오연석, 윤현민, 최은준, 고민섭, 김덕영*, 한국CDE학회 2023 하계학술대회)
  • "Data Similarity Measure by Integrating Input Data and Loss Information for Transfer Learning" G. Lee, D.-Y. Kim*, 2023 Summer Conferences of Society for Computational Design and Engineering, 2023. ("전이학습을 위한 Input Data와 Loss를 동시에 고려한 데이터 유사도 측정 방법", 이기홍, 김덕영*, 한국CDE학회 2023 하계학술대회)
  • "A Finite Element Approach for Rapid Simulation of Large-scale Traffic Systems", H. Lim, D.-Y. Kim*, 2023 Summer Conferences of Society for Computational Design and Engineering, 2023. ("대규모 교통 시스템의 신속한 시뮬레이션을 위한 유한요소적 접근 방법", 임해리, 김덕영*, 한국CDE학회 2023 하계학술대회)
  • "Prediction of Machine Component Wear in the Injection Molding Process Under Multiple Operating Conditions", H. Yoon, D.-Y. Kim*, 2023 Summer Conferences of Society for Computational Design and Engineering, 2023. ("다양한 사출 성형 공정 조건을 고려한 기계 부품 마모도 예측", 윤현식, 김덕영*, 한국CDE학회 2023 하계학술대회)
  • "Anomaly Detection in Electromechanical Systems under Differing Operating Conditions via SVDD Method", J. Cho, Y. Song, D.-Y. Kim*, Korean Institute of Industrial Engineers, 2023. ("SVDD를 활용한 다양한 작동 조건에서 전기 기계 시스템의 이상 탐지", 조주현, 송영원, 김덕영*, 2023 대한산업공학회 춘계공동학술대회 논문집)
  • "Intersection Digital Twin Model Considering Real-time Traffic Information for Optimal Control of Traffic Flow", M. Go, H. Lim, T. Lim, D.-Y. Kim*, Korean Institute of Industrial Engineers, 2023. ("교통 흐름 최적 제어를 위한 실시간 교통정보를 반영하는 교차로 디지털 트윈 모델", 고민섭, 임해리, 임태규, 김덕영*, 2023 대한산업공학회 춘계공동학술대회 논문집)
  • "Abrasivity Diagnosis of Mechanical Parts through Analysis of Discrete Process Variables and Multi-sensor Data in Injection Molding", H. Yoon, D.-Y. Kim*, 2023 Winter Conferences of Society for Computational Design and Engineering, 2023. ("사출 성형 이산 공정 변수와 멀티 센서 데이터 해석을 통한 기계 부품 마모도 진단", 윤현식, 김덕영*, 한국CDE학회 2023 동계학술대회)
  • "Fault Detection System in Elevators by Signal Pattern Analysis of the Electrical Current of Motor Inverters", J. Cho, M. Go, D.-Y. Kim*, 2023 Winter Conferences of Society for Computational Design and Engineering, 2023. ("모터 인버터 전류 신호의 패턴 분석 기반 엘리베이터 이상 감지 시스템", 조주현, 고민섭, 김덕영*, 한국CDE학회 2023 동계학술대회)
  • "P2P (Port to Port) Digital Logistics Platform Design", H. Lim, E. Choi, J. Park, D.-Y. Kim*, 2023 Winter Conferences of Society for Computational Design and Engineering, 2023. ("P2P (Port to Port) 디지털 물류 플랫폼 설계", 임해리, 최은준, 박진우, 김덕영*, 한국CDE학회 2023 동계학술대회)
  • "Fault Diagnosis in Injection Molding by Learning Data Adaptation Considering the Degradation Level of Machine Components", G. Lee, D.-Y. Kim*, 2023 Winter Conferences of Society for Computational Design and Engineering, 2023. ("기계부품의 노후화를 고려한 학습데이터적응 기반 사출성형공정 이상진단 ",이기홍, 김덕영*, 한국CDE학회 2023 동계학술대회)
  • "Manufacturing Execution Entity for Industrial Controller- Independent Control Programming", H. Yoon, D.-Y. Kim*, 2023 Winter Conferences of Society for Computational Design and Engineering, 2023. ("산업용 제어기에 독립적인 제어 프로그래밍을 위한 Execution Entity 구조 연구", 윤현민, 김덕영*, 한국CDE학회 2023 동계학술대회)
  • "Active Factory Device Driver for Integrated Data Acquisition via Extended OPC-UA Protocols", M. Go, E. Choi, H. Yoon, D.-Y. Kim*, 2023 Winter Conferences of Society for Computational Design and Engineering, 2023. ("OPC UA를 통한 실시간 데이터 수집을 위한 액티브 제조 장비 드라이버", 고민섭, 최은준, 윤현민, 김덕영*, 한국CDE학회 2023 동계학술대회)
  • "Discrete Wavelet-based Anomaly Detection in Elevator Systems under Multiple Operating Conditions", J. Cho, D.-Y. Kim*, Korean Institute of Industrial Engineers, 2022. ("다양한 운행 조건에서 엘리베이터 시스템의 이산 웨이블릿 기반 이상 감지", 조주현, 김덕영*, 2022 대한산업공학회 추계학술대회 논문집)
  • "Data Definition for Intersection Digital Twin Configuration with Signal and Road Traffic Flow", M. Go, E. Choi, D.-Y. Kim*, Korean Institute of Industrial Engineers, 2022. ("신호와 도로 교통 흐름을 반영하는 교차로 디지털 트윈 구성을 위한 데이터 정의", 고민섭, 최은준, 김덕영*, 2022 대한산업공학회 추계학술대회 논문집)
  • "A Conceptual Information Model for the Autonomous Agent Control of Manufacturing Workcells", M. Go, D.-Y. Kim*, CDE 2022 Summer Conference, 2022. ("제조 워크셀 자율 제어를 위한 에이전트 정보 모델 설계", 고민섭, 김덕영*, 한국CDE학회 2022 하계학술대회)
  • "A Conceptual Framework of Manufacturing Execution Language for Rapid Control Programming", G. Min, H. Yoon, D.-Y. Kim*, Proceedings of the Korean Society of Mechanical Engineers Conference, 2022. ("신속 제어 프로그래밍을 위한 제조실행언어 프레임워크", 민경환, 윤현민, 김덕영*, 대한기계학회 IT융합부문 2022년도 춘계학술대회 논문집)
  • "Information sharing of shipping and cargo for the P2P (Port to Port) digital logistics platform", J. Park, H. Lim, D.-Y. Kim*, Proceedings of the Korean Society of Mechanical Engineers Conference, 2022. ("P2P (Port to Port) 디지털 물류플랫폼 구축을 위한 선박의 운항 및 화물 정보 공유 체계 설계", 박진우, 임해리, 김덕영*, 대한기계학회 IT융합부문 2022년도 춘계학술대회 논문집)
  • "Principal Component Transformation Considering the Abrupt Variance of Signals for Anomaly Detection in the Injection Molding Processl", H. Yoon, D.-Y. Kim*, Proceedings of the Korean Society of Mechanical Engineers Conference, 2022. ("사출성형 공정 이상감지를 위한 신호 급변동성을 고려한 주성분 변환", 윤현식, 김덕영*, 대한기계학회 IT융합부문 2022년도 춘계학술대회 논문집)
  • "The geometric feature extraction of 3D CAD models for the automated design of an assembly workcell", J. Park, D.-Y. Kim*, Proceedings of 2022 Winter Conference of Society for Computational Design and Engineering, 2022. ("조립 작업셀 자동설계를 위한 3D CAD 기하 정보 추출", 박진우, 김덕영*, 한국CDE학회 2022 동계학술대회)
  • "Rapid Control Programming via Multiplatform Manufacturing Execution Language", G. Min, D.-Y. Kim*, Proceedings of the Korean Society of Mechanical Engineers Conference, 2021. ("멀티플랫폼 제조 실행 언어를 이용한 신속 제어 프로그래밍", 민경환, 김덕영*, 대한기계학회 IT융합부문 2021년도 춘계학술대회 논문집)
  • "Multi-Layered Hardware Abstraction for Manufacturing Control Systems", J.H. Shin, G.H. Min, D.-Y. Kim*, The Korean Society of Mechanical Engineers Conference, 1257-1259, 2020. ("제조설비 제어 및 운용을 위한 다층 하드웨어 추상화", 신정하, 민경환, 김덕영, 대한기계학회 학술대회 논문집)
  • "An user-friendly fault diagnostic system for the injection-molding process of car door trim panel", H. S. Yoon, D.-Y. Kim*, The 26th Winter Conference of Society for Computational Design and Engineering, 40, 2020. ("운영사용자 친화형 사출공정 모니터링 시스템", 윤현식, 김덕영, 제 26회 한국CDE학회 동계학술대회)
  • "Sensor Data Preprocessing for IIoT-based Injection Molding process diagnosis",H. S. Yoon, K. W. Park, D.-Y. Kim*, Conference on Information and Control Systems, 54-54, 2019
  • "Principal Component Analysis Considering Abrupt Variance of Sensor Signal", H. S. Yoon, D.-Y. Kim*, The Korean Society of Mechanical Engineers Conference, 689-690, 2019. ("센서 신호의 급변동성을 고려한 주성분 분석" 윤현식, 김덕영)
  • "M2M communication for rapid factory reconfiguration", J. Park, D.-Y. Kim*, CDE 2019 Winter Conference, 2019. ("신속 공장 재구성을 위한 M2M 커뮤니케이션", 박진우, 김덕영*, 한국 CDE 학회 2019 동계 학술대회, 2019")
  • "A self-layout recognition method for rapid factory", J.Park, D.-Y. Kim*, Proceedings of the Korean Society of Mechanical Engineers Conference 2018, 2018. ("신속 공장 재구성을 위한 레이아웃 변경 자동 인식 방법", 박진우, 김덕영*, 대한기계학회 IT융합부문 2018년도 춘계학술대회 논문집)
  • "Optimal Assembly Part Positioning on a Transformable Pin-Jig System Considering Stress and Deformation", H.Kim, J.Park, D.-Y.Kim* Proceedings of the Korean Society of Mechanical Engineers Conference 2018, 2018. ("파트 변형 요소를 고려한 형상 가변 지그 조립 파트 탑재 최적화", 김한솔, 박종일, 김덕영*, 대한기계학회 IT융합부문 2018년도 춘계학술대회 논문집)
  • "Optimal Part Positioning on Transformable Jig Considering Screw Positions and Part Geometry", H. Kim, J. Park, D.-Y. Kim*, CDE 2018 Winter Conference, 2018. ("형상 가변 지그에서의 나사 체결 위치와 파트 형상을 고려한 조립 파트 탑재 최적화", 김한솔, 박종일, 김덕영*, 한국 CDE 학회 2018 동계학술대회 논문집, 2018)
  • "Similarity measurement between the discretized state vectors of sensor signals based on fault pattern and its frequency", K. Namgung, S. Baek, D.-Y. Kim*, KIIE 2018 Spring Conference, 2018. ("고장패턴 경향성 및 빈도에 따른 센서 신호 이산화 벡터 간의 유사도 측정", 남궁기창, 백수정, 김덕영*, 2018 대한산업공학회 춘계학술대회 논문집, 2018)
  • "An abrupt variance analysis of multiple sensor signals for dimension reduction in fault diagnosis and prognosis", H. Oh, D.-Y. Kim*, KIIE 2017 Fall Conference, 2017. ("기계시스템 이상진단을 위한 Abrupt 분산분석 기반 멀티센서 시그널의 차원축소", 오하영, 김덕영*, 2017 대한산업공학회 추계학술대회 논문집, 2017)
  • "A three-dimensional deviation analysis by recognizing the coordinate of randomly positioned objects", H. Kim,, D.-Y. Kim*, KIIE 2017 Fall Conference, 2017. ("랜덤 위치 측정물의 3차원 좌표식별을 통한 조립오차 검출", 김혜림, 김덕영, 2017 대한산업공학회 추계학술대회 논문집, 2017)
  • "The Ulsan Smart Factory Testbed-A Reconfigurable Factory", D.-Y. Kim, J. Park, H. Kim, K. Park, S. Baek, K, Namgoong, H. Kim, J. Park, H. Oh, W. Baek, 2017 KSME Fall Conference, 2017. ("울산 스마트팩토리 테스트베드 - 모듈형 가변 공장", 김덕영*, 박진우, 김혜림, 박기범, 백수정, 남궁기창, 김한솔, 박종일, 오하영, 백운상, 2017 추계 대한기계학회 학술대회논문집 (우수논문상), 2017)
  • "Early Degation Detection of the Insulation Resitance of MLCCs by the Pattern Analysis of Capacitance and Dissipation Signals", S. Baek, D. Kwon*, D.-Y. Kim*, The 16th International Symposisum on Microelectronics and Packaging, 2017
  • "RCP and distributed control framework for rapid reconfiguration of manufacturing system", J. Park, B. Kim, K. Park, D.-Y. Kim*, KIIE 2017 Spring Conference, 1607-1619, 2017. ("제조 시스템의 신속 재구성을 위한 RCP 및 분산제어 프레임웍", 박진우, 김보배, 박기범, 김덕영, 대한산업공학회 춘계학술대회 논문집, 1607-1619)
  • "Development of real-time fault diagnosis and prediction platform for production line of motorized root canal treatment handpieces". H. Oh, S. Baek, D.-Y. Kim*, KIIE 2017 Spring Conference, 1582-1592, 2017. ("전동 근관치료 핸드피스 생산라인의 실시간 이상 진단 및 예지 플랫폼 개발", 오하영, 백수정, 김덕영, 대한산업공학회 춘계학술대회 논문집, 1582-1592)
  • "The IIoT-enabled smart factory testbed in Ulsan", H. Kim, J. Park, S. Baek, B. Kim, H. Oh, K. Park, K. Namgoong, D.-Y. Kim*, KSME 2017 Spring Conference, 14-15, 2017. ("울산 사물인터넷 제조융합 테스트베드", 김혜림, 박진우, 백수정, 김보배, 오하영, 박기범, 남궁기창, 김덕영, 대한기계학회 IT융합부문 2017년도 춘계학술대회 논문집,14-15,2017.)
  • "IIoT -Based Manufacturing Process Monitoring and Part Positioning", W.Jeong, K.Namgoong, D.-Y.Kim*, KIIE 2016 Fall Conference, 2016. ("사물 인터넷기술을 활용한 생산공정 진도측정 및 부품 위치추적 기법", 정원일, 남궁기창, 김덕영, 2016 대한산업공학회 추계학술대회 논문집, 2016)
  • "Fault Symptom Extraction of Automotive Engines by the Event Occurrence Analysis Over Time interval", S.Baek, D.-Y.Kim*, KIIE 2016 Fall Conference, 2016. ("이벤트 발생 시간 간격을 고려한 자동차 엔진 고장 징후 분석", 백수정, 김덕영, 2016 대한산업공학회 추계학술대회 논문집, 2016)
  • "A Transformable Pin-Jig System For Car Door-Trim Assembly", J.Park, H.Oh, H. Kim, D.-Y.Kim*, Proceedings of the Korean Society of Mechanical Engineers Conference 2016, 2016. ("자동차 도어트림 조립을 위한 형상 가변 Pin-Jig 시스템", 박종일, 오하영, 김한솔, 김덕영,2016 대한기계학회 추계 학술대회, 2016)
  • "Trend of predictive maintenance technology for facilities and products using sensor information", S.Baek, H.Oh, W.Baek, D.-Y. Kim*, Proceedings of the Society of Computational Design and Engineering Conference 2016, 2016. ("센서정보를 활용한 설비 및 제품 품질 예지보전 기술 동향", 백수정, 오하영, 백운상, 김덕영, 한국 CDE학회 2016 부분연합 학술대회 발표 (우수논문상))
  • "A real-time condition monitoring system for the assembly process of automotive manual transmission gear", H. Kim, S. Baek, D.-Y. Kim, KIIE 2016 Spring Conference, 5798-5800, 2016. ("수동 변속기 기어 조립공정의 실시간 설비 및 제품 상태 진단 시스템 구축", 김혜림, 백수정, 김덕영, 2016 산업공학회 춘계 공동학술대회 논문집, 5798-5800, 2016)
  • "Simulation-based layout design considering supply vulnerability of raw material in food production", J. Park, H. Oh, D.-Y. Kim, Y. Cho, KIIE 2016 Spring Conference, 3898-3915, 2016. ("식품 원재료 공급 취약성을 고려한 시뮬레이션 기반 공정설계", 박진우, 오하영, 김덕영, 조용주, 2016 산업공학회 춘계 공동학술대회 논문집, 3898-3915, 2016)
  • “Supply vulnerability assessment of raw material in food production”. H. Oh, J. Park, D.-Y. Kim*, Y. Cho, Proceedings of the Society of CAD/CAM Conference, 243-245, 2016. ("지역 및 계절 별 식품 원재료 공급 취약성 평가모델", 오하영, 박진우, 김덕영, 조용주, 한국 CAD/CAM 학회 동계학술발표회 논문집, 243-245, 2016)
  • "Block Assembly Monitoring in Shipbuilding Using Overhead Crane Operation Data", W. Jeong, H. Oh, J. Park, D.-Y. Kim*, S. Lee, T. Choi, S. Ha, Proceedings of the Society of CAD/CAM Conference, 652-655, 2016. ("소조립품 탑재정보를 이용한 조선블록 조립 공정관리", 정원일, 오하영, 박진우, 김덕영, 이성호, 최태훈, 하승진, 한국 CAD/CAM 학회 동계학술대회 논문집, 652-655, 2016)
  • "LaserWel: A Laser Welding Process Monitoring & Fault Classification System", R. Oh, J. -I. Park, D.-Y. Kim*, Proceedings of the Society of CAD/CAM Conference, 934-937, 2016. (LaserWel: 레이저용접 모니터링 및 용접불량 분석 시스템", 오록규, 박종일, 김덕영, 한국 CAD/CAM 학술발표회 논문집, 934-937, 2016)
  • "Characterization of System Status Signal Considering the Variation Trend of Frequency and Amplitude", W. Baek, S. Baek, D.-Y. Kim*, Proceedings of the Society of CAD/CAM Conference, 656-659, 2016. ("주파수 및 진폭의 분산 변화 패턴을 고려한 시스템 상태신호 특성 정의", 백운상, 백수정, 김덕영, 한국 CAD/CAM 학회 학술발표회 논문집, 656-659, 2016)
  • "Multivariate discretization via dynamic time segment for fault pattern extraction", S. Baek, W. Baek, D. -Y. Kim*, KIIE 2015 Fall Conference, 1751-1754, 2015. ("고장 패턴 추출을 위한 Dynamic time segment 기반의 다변량 이산화 기법", 백수정, 백운상, 김덕영, 대한산업공학회 추계학술대회 논문집, 1751-1754, 2015)
  • "Design of a Smart Kimchi Manufacturing System", B. Kim, J. Park, W. Jeong, J. -I. Park, H. Kim, D. -Y. Kim*, Y. Jeong, KIIE 2015 Fall Conference, 1510-1515, 2015. ("스마트 김치원료종합처리장 시스템 설계", 김보배, 박진우, 정원일, 박종일, 김혜림, 김덕영, 정영배, 대한산업공학회 추계학술대회 논문집, 1510-1515, 2015)
  • "Effects of sampling rate on the performance of multidimensional discretization-based fault detection", S. Baek, D.-Y. Kim, KIIE 2015 Spring Conference, 1905-1910, 2015. ("Sampling rate의 다차원 이산화 기법을 응용한 고장 감지 성능에 미치는 영향 분석", 백수정, 김덕영, 대한산업공학회 춘계학술대회 논문집, 1905-1910, 2015)
  • "Simulation based improvement of food production process", J. Park, D.-Y. Kim, Y. Cho, Proceedings of the Society of CAD/CAM Engineers,160, 2015. ("시뮬레이션 기반의 식품 제조 공정 개선 연구", 박진우, 김덕영, 조용주,한국 CAD/CAM 학술발표회 논문집,160, 2015)
  • "Simulation based FMEA and statistical fault tree analysis of an embedded feedback control system", W. Baek, D.-Y. Kim, S. Baek, Proceedings of the Society of CAD/CAM Engineers,685-690, 2015. ("임베디드 피드백 컨트롤 시스템에 대한 시뮬레이션 기반의 FMEA와 통계적 Fault tree 분석", 백운상, 김덕영, 백수정, 한국 CAD/CAM 학술발표회 논문집, 685-690, 2015)
  • "On the detection sensitivity of multi-dimensional discretization parameters for automotive engine diagnostics", S. Baek, D.-Y. Kim, W.Baek, Proceedings of the Korean Society for Precision Engineering Conference, 72, 2014. ("다차원 이산화 파라미터의 결함진단 성능에 미치는 민감도 분석", 백수정, 김덕영, 백운상, 한국 정밀공학회 학술발표회 논문집, 72, 2014)
  • "A Fault Detection Method of Laser Welding based on PDF Estimation and Dempster-Shafer Theory," R. Oh, D.-Y. Kim, Proceedings of the Society of CAD/CAM Conference, 1011-1016, 2014. ("PDF Estimation 과 Dempster-Shafer theory 를 이용한 레이저용접 결함검출 기법", 오록규, 김덕영, 한국 CAD/CAM 학술발표회 논문집, 1011-1016, 2014)
  • "A Failure Maintenance System for Marine Diesel Engines",Y. Lee, D.-Y. Kim, M. Hwang, Y. Cheong, Proceedings of the Society of CAD/CAM Conference, 770-772, 2013. ("선박 엔진 결함 시스템 진단 및 예측 시스템", 이양지, 김덕영, 황민순, 정영수, 한국 CAD/CAM 학회 학술발표회 논문집, 770-772, 2013)
  • “Laser welding quality monitoring using plasma, back reflection and temperature signals based on Dempster-Shafer theory”, A. Sinha, D.-Y. Kim*, D. Proceedings of the Society of CAD/CAM Conference, 240-242, 2013
  • "A comparative study of engine fault detection methods”, S. Baek, D.-Y. Kim*, Proceedings of the Society of CAD/CAM Conference, 243-248, 2013. (“자동차 엔진 고장 감지 기법 비교 연구”, 백수정, 김덕영, 한국 CAD/CAM 학회 학술발표회 논문집 (우수논문상), 243-248, 2013)
  • "A study on data pre-filtering methods for fault diagnosis",Y Lee, D.-Y. Kim*, M. Hwang, Y. Cheong, Proceedings of the Society of CAD/CAM Conference, 301-308, 2012. ("시스템 고장원인분석을 위한 데이터 로그 전처리 기법 연구", 이양지, 김덕영, 황민순, 정영수, 한국 CAD/CAM 학회 학술발표회 논문집, 301-308, 2012)
  • “Effects of part-to-part gap on the performances of two types of laser welding systems”, H. Kim, D.-Y. Kim*, H. Seol, KIIE 2012 Fall Conference, 679-683, 2012. (“이종 레이저 용접시스템을 이용한 part-to-part gap과 용접 품질의 상호 연관성 분석”, 김현기, 김덕영, 설현욱, 대한산업공학회 추계학술대회 논문집, 679-683, 2012)
  • “Intelligent discretization methods for failure pattern analysis”, S. Baek, Y. Lee, D.-Y. Kim*, KIIE 2012 Fall Conference, 581-585, 2012. (“고장원인분석을 위한 지능형 이산화 기법”, 백수정, 이양지, 김덕영, 대한산업공학회 추계학술대회 논문집, 581-585, 2012)
  • "Virtual Manufacturing for an Automotive Company - Construction and Operation of a Virtual Paint Shop", D.-Y. Kim, S. Noh, S. Hong, H. Hahn, K, Kim, Y. Park, H. Shin, K. Jung, Proceedings of 2001 KIIE Fall Conference, Yongin, Korea, November 3, 2001
  • "A Study on the Virtual Automotive Plant for a Virtual Manufacturing," S. Noh, S. Hong, D.-Y. Kim, C. Sohn, H. Hahn, Y. Park, H. Shin, K. Chung, Proceedings of 2000 KSME Fall Annual Meeting, Seoul, Korea, November 3, 2000
  • "Development of a Reverse Engineering System for Stamping Die Manufacturing," D.-Y. Kim, S. Noh, H. Joo, H. Hahn, presented at 2000 KSPE Fall Conference, Suwon, Korea, Oct. 28, 2000
  • Development and Operation of a Virtual Plant for a Body Shop," D.-Y. Kim, S. Hong, S. Noh, H. Hahn, Proceedings of 2000 KIIE Fall Conference, Seoul, Korea, November 4, 2000
  • "Event-driven Informational and Dynamical Model for Manufacturing System," D.-Y. Kim, M. Jung, presented at 1999 MS/IE Spring Joint Conference, Taegu, Korea, April. 23-24, 1999
  • "EXPRES: An Event-driven dynamic scheduling," D.-Y. Kim, M. Jung, Proceedings of 1999 IE Fall Conference, Seoul, Korea, Oct. 30, 1999
  • "Extended Production Reservation Scheme in Cooperative Problem Solving," D.-Y. Kim, H. Cho, M. Jung, Proceedings of 1998 IE Fall Conference, Seoul, Korea, Oct. 17, 1998
  • "Construction & Operation of a Virtual Paint Shop for an Automotive Company,” with C. Sohn, IAE, Dec., 2001
  • "Development of Real-Time Dynamic Scheduler for Turbo FMS," with M. Jung, Final Research Report, TurboTek Co. Ltd. and POSTECH, February, 2000
  • "Web based Equipment Data Management System Technical Correspondence," with B. Patrick, and S. Noh, IAE, Sep., 2000
  • "Development of a Reverse Engineering System for Stamping Die Manufacturing," with S. Noh, IAE, Dec., 2000
  • "Construction and Operation of Virtual Automotive Plant," with S. Noh, C. Sohn, C. Lee, and S. Hong, IAE, Dec., 2000
  • "Development of the 3-D Modelling Technology for a Virtual Body Shop of a Automotive Company," with C. Sohn, and S. Noh, IAE, Dec., 2000
  • "Measurement of Equipments for a Virtual Body Shop of an Automotive Company," with S. Noh, IAE, Dec., 2000
  • "Report R205.2: Review and assessment on the launched common research activities in the research area of Engineering and Product Life-Cycle Knowledge Management,” with P. Xirouchakis, A. Fischer, G. Molcho, N. Matta, F. Pourroy, The Virtual Research Lab for a Knowledge Community in Production, 2007
  • "Collaborative conceptual design support system for a satellite design,” with P. Xirouchakis, EPFL Space Centre, May, 2007